Name: Trace
E-Mail: xxxxxxxxxxxx
Date/Time: 8/13/99 3:18 AM
Subject: FOR THOSE THAT ARE INTERESTED...


Hey gang;

Well, the pots that fit this aren't the easiest thing t track down or go out and buy
at the local electronic store but for those that are interested you can use a
Fender PCB mount pot and it's the same thing but only a bit more sturdy.

MODS:

Nothing really drastic but here's the basic scoop.

First 12AX7:

Plate resistors: 100K's instead of the 150K's
Cathodes: pin#3 is 2.7K/.68uF in place of the 1.5K
Pin#8 is 4.7K/22uF in place of the 1.5K/22uF
Plate Cap for #1 is .1uF instead of the .047uF
Plate Cap for #6 is .022uF instead of .047uF

Second 12AX7:

Plate Resistors: 100K's in place of the 150K's
Plate Cap for #1 is .022 instead of the .047uF (same with #6) I also put a 330pF
cap (connected to a switch) across the treble cap of the EQ section.
Cathodes: Pin#3 is 820ohm/22uF in place of the 1.5K/.047uF

That's pretty much it and I'll hopefully have a JPG schematic ready soon if
anyone wants it.

For what it's worth;
Trace