From: Marco   (pancaldi@supersonica.it)
Date: 2/21/2002 12:48 AM
Subject:
Re: I need opinions about Fender TBX tone control...

Steve,
 
after long thinkering I suggest a new mod to the stock wiring using the two
stacked pot separated:
 
- the 250K section uses a little 0.0047 cap to ground as a normal treble bleed
control (after center detent it is a "no load" tone pot).
 
- the 1M section bypasses a 0.001 cap inserted on the signal path (you can use
a G&L passive bass control as reference). At 10 you obtain a slight reduction
in bass response. This helps to open the tone (with humbucker selection,
probably due to the higher impedances involved, the bass reduction at 10 is a
little more respect to single coils).
 
TBX is for Treble-Bass-Expander...or not? That's it!
Your comments are welcome.

m.