I have a 1998 A/S Strat with SD hot live wire pups.  Although 
I really dig the tone and output from the LW-HS1 set I always thought 
they had a little too much of a bright top end.  I'm not real big on 
overly bright strats.  I just installed a .0022 mf cap across the 
output jack of the strat and it made a huge difference.  Held the tone 
and output of the guitar but rolled just enough of the top off to 
really make a noticeable and useable improvement.  

	I was thinking, why not wire .0022 caps or whatever value 
works for your ears from the single coil hot lugs on the switch 
directly to ground on SSH guitars loaded with 500k pots.  That way 
your bridge HB doesn't lose its top end off of 250k pots, and the 
singles can be top rolled if the 500ks make them too bright.  You'd 
get a bit of top roll in the #4 position but I dont think it 
would be too great a loss.

	We keep having this topic come up, and this might be a 
cheap and effective way to find middle ground in the SSH 250/500k pot
problem.